NT Server 4.0 in the Enterprise(93)
		Here are the questions from the test to all, good luck. 1. There exists a network with 3 separate locations. U administer the network remotely using DUN from a wks. U are using RAS Auto-dial to connect to each RAS server in the 3 separate locations, based on UNC, or DNS name resource on the server. What needs to be done on the wks?  a. Install DNS  b. Install null modem adapter  c. Configure wks with SLIP  d. Create phone book entry for each RAS U want to use. (ans)  e. Create Lmhosts file that maps DNS to the IP address 2. After installing Network Client Admin tools, what needs to be done to do a remote installation of Windows 95 client over the network? 3 Answers a. Create a share on the folder containing the Windows 95 cab files.  b. Create a Windows 95 network installation startup disk  c. Boot the new PC from the network installation startup disk  3. U are upgrading Windows NT Server 3.51 to Windows NT Server 4.0. What must U do in order to preserve existing settings? anwers: Boot from the NT 4.0 setup boot disks & install Server 4.0 in the same directory as NT 3.51 to preserve the existing configurations. 4. You are trying to print a payroll report and the print device jams. The print device is attached to a Windows NT print server. The application you are using does not allow you to resubmit print jobs. After clearing the paper jam, what would you do to reprint the document? a. select the printer from the Printers folder and choose Resume from the Printer menu b. select the printer from the Printers folder and choose Restart from the Printer menu c. select the printer from the Printers folder and choose Resume from the Document menu d. select the printer from the Printers folder and choose Restart from the Document menu Answer: d 5. You are running Network Monitor on your Windows NT Server machine. You  want to capture all frames being transmitted between your computer and the  network except for those frames that arm sent from Ravindra's machine. Your  machine name is NTGuru and Ravindra'a machine name is Ray. What is the best  way to configure your capture filter?  a. EXCLUDE NTGuru <-- RAV  b. EXCLUDE NTGuru <--> RAV  c. INCLUDE NTGuru --> ANY EXCLUDE ANY <-- RAV  d. INCLUDE NTGuru <--> ANY EXCLUDE NTGuru --> RAV  e. INCLUDE NTGuru <--> NOT(RAV)  Answer: a  6. Your company has user accounts and 30,000 computer accounts. The users  are distributed among the fifteen branch offices of your company. You want  to administer all of the user accounts from one central location. However,  the administrators at each city still must be able to manage local resources.  Which of the following is the best domain model for your company?  a. single domain  b. single master domain  c. multiple master domain  d. complete trust  Answer: c  7. What is the primary function of a Windows Internet Name Service server? a. to assign and maintain IP address information for computers on a local subnet b. to route fully qualified domain name information across subnets c. to resolve NetBIOS names to computer IP addressee d. to resolve computer IP addressee to hardware addressee Answer: c 8. A computer named StationO1 belongs to a domain called Sales. Jason wants to add another Windows NT computer named StationO2 to the Sales domain. Jason disconnects StationO1 from-the network, and renames StationO2 to StationO1. However, the computer cannot participate in domain administration of the Sales domain. What La the moat likely cause of the problem? a. The Sales domain already has the maximum number of computer accounts. b. There is another computer named Station0l in a trusted domain. c. There is another computer named Station0l in a trusting domain. d. Simply renaming the computer does not make the computer join the Sales domain. Answer: d 9: Which of the following best describes disk striping without parity? a. It requires a minimum of four hard disks. b. It can be implemented on FAT or NTFS partitions. c. It is a better fault tolerance strategy than disk mirroring in terms of write performance. d. The data can be recovered using the Regenerate command if a disk in the stripe set fails. Answer: b 10. All domains in your company trust the MIS domain. What types of user accounts or groups can be added to a global group in the MIS domain? _ a. only user accounts from the MIS domain b. user accounts from both the MIS domain and from any trusting domain c. user accounts and other global groups from the MIS domain d. user accounts from both the MIS domain and from any trusting domain along with local groups from any of the trusting domains Answer: b 11: One of the physical disks on your PDC is experiencing performance problems due to Tile fragmentation. The physical disk consists of a single NTFS partition. How can you defragment this disk? a. run Defrag.Exe from the command prompt b. run Defrag32.Exe from the command prompt c. run DiakPerf.Exe from the command prompt d. perform a backup of the partition, reformat the partition and restore the files from backup Answer: d 12. You are trying to print to an HP-series network interface print device that uses Data Link Control (DLC). DLC is also installed on your computer. However, you cannot print to the network interface print device after you react the printer. What is the moat likely cause of the problem? a. the print processor is corrupt b. the DLC protocol has become uninstalled on the network interface print device c. another computer is connected to the printer using the Microsoft TCP/IP Printing Service d. another computer is connected to the printer using DLC in continuous connection mode Answer: d 13. System failure on server. To examine memory.dmp file? You decide to decode the data. Use what?  A. Mem.exe  B. debug.exe  C. viewnad.exe  D. dumpexam.exe  14. Since you added 7 BDCs to your network, network traffic due to domain synchronization has increased.  Loggins to your domain has slowed down in the first 2 hours of the morning, what to do ? A. Add more BDC's  B. Increase the value of the Pulse Concurrency settings C. Increase the value of the Pulse setting (answer) D. Change the Replicator Governor parameter  15. WWW service for 10 Companies. Every Co. with one registered Domain Name. Separate WEB for each on 1 NT Server with IIS. (Choose All)  A. Assign Multiple IP to network Adapter (Answer) B. Same IP to each co. Name on DNS. (Answer) C. Assign separate IP to each WWW folder (Answer) D. Wins to assign IP to NetBIOS name. 16. How do you change interval time in perfmon Once you have finished creating a baseline for using the Log in Performance Monitor?  A. With diskperf from cmd line  B. relogging into performance monitor (answer) C. histogrm  D. Sys log in event viewer 17. Network consist of a NT server and several NT workstations. You want to ensure that TC/IP is used whenever possible. what shouil you do? A . Change network provider on workstation B. Change network provider on server C. Change network binding order on workstation (Answer) D. Change network binding order on server 18. You have the job to make new custom fault tolerance standard for your company.  The company now uses disk duplexing as the current standard.  Required results : Data integrity must be maintained when 1 disks fails.  Optional results : The fault tolerance method must not use additional processor time.  The read access time must be improved.  Proposed Solution : Introduce a stripeset with parity. What does the proposed solution produce?  The required result and the optional results  The required result and one of the optional results. (MA) The required result only.  Does not produce the required result.  19. You have just set up separate user profiles and directories for every user in your domain. What must you do to allow each user to start using 0a new profile?  a. For each user 'e account, specify the full UNC pathname of each user' a profile directory on the User Environment Profile screen in User Manager for Domains. b. For each user 'e account, specify the full UNC pathname of each user's profile directory and a shared network drive letter on the User Environment Profile screen in User Manager for Domains. c. For each user 'e account, specify the directory name, server name and domain name of each user's profile directory on the User Environment Profile screen in User Manager for Domains. d. For each user 'e account, specify the %HOMEPATH% variable on the User Environment Profile screen in User Manager for Domains. Answer: a 20. 3. Network consist of WIN95 and NT workstations . You want to configure system policy. How?  A. Create user with config.pol and ntconfig.pol files. (Answer) B. Create roaming profile C. Create mandatory profile D. Specify location of policy file on the PDC or in trusted domain 21. 4. Which of the following combinations of file systems and protocols is required when using the Migration Tool for NetWare to transfer files and folders from a NetWare server to a Windows NT server?  a. FAT and NWLink  b. FAT and TCP/IP  c. NTFS and NetBEUI  d. NTFS and NWLink (Answer) e. NTFS and TCP/IP 22. You want to configure directory service architecture so that administrator in each business unit can manage only the user account and resource permission for that unit. You do not want to allow administration of one business unit to have administrative rights in another business unit. You want to allow an administration from one business unit to permit a user from a different business unit to have access to local resources. Which directory service model should you choose? A. Single domain model. B. Single master domain model.  C. Multiple master domain model.  D. Complete trust model. (Answer) 23. You have implemented a mirror set to protect your boot partition. One disk fails, what is the best way to restore the mirror set?  a. Replace the failed disk and do nothing more .  b. Replace the failed disk and choose regenerate from the fault tolerance menu  c. Replace the failed disk and break the original mirror set and establish a new mirror set (Answer) d. Replace the failed disk and choose regenerate from the partition administrator 24. You have a user Maria as a member of Accounts domain. There is a Sales domain with a RAS server. Sales trusts Accounts. Maria is given access to the Share folder in the RAS server in Sales domain. Yet when she tries, she receives the message that access is denied. Why she can not access the Share folder? Give access in which of the following?  A. User manager for domains B. Remote access admin C. Share permission override (Answer) D. NTFS permission override 25. Suppose the following situation exists: The Field Engineers of your company  want to dial into your Windows NT network remotely using Windows NT Workstation  4.0 and RAS client software on their portable computers. They will be accessing  and transmitting highly sensitive documents, and you need to ensure that proper  security against wiretapping is implemented. Required result: The Field Engineers must be able to access your network using RAS. All data transmitted between your RAS server and the clients' computers is encrypted. Optional desired results: All passwords transmitted between your RAS server and the clients' computers are encrypted. Telephone numbers that Field Engineers are calling from must be authenticated before allowing them to connect to the RAS server. Proposed solution: Set the minimum password length to ten characters in the Account Policy dialog box for the domain. Grant all Field Engineers dial-up access on the RAS server. Install a hardware-based security host between the RAS server and the modem. Configure the RAS server to accept any authentication including clear text. Configure callback security on the RAS server to use the Set By Caller option. Which results does the proposed solution produce? a. The proposed solution produces the required result and produces both of the optional desired results. b. The proposed solution produces the required result and produces only one of the optional desired results. c. The proposed solution produces the required result but does not produce any of the optional desired results. d. The proposed solution does not produce the required result. Answer: d 26. 3. The Sales, Marketing and Accounting domains contain 50 user accounts each. Ail 150 users need to access files on a Windows NT server in another domain called Corp. How would you configure the trust relationships? a. configure Sales, Marketing and Accounting to trust the Corp domain b. configure Sales, Marketing and Accounting to be trusted by the Corp domain c. configure Sales, Marketing, Accounting and Corp with complete two-way trust relationships d. do not configure any trust relationships, and install Gateway Service on the file server in the Corp domain Answer: b 27. You have just installed a new SCSI controller driver in Windows NT, but now you cannot got the system to boot properly. No other change has been made to the computer. What is the easiest way to troubleshoot this problem so that the system can boot properly? a. boot Windows NT from the Emergency Repair Disk b. boot to DOS and run Diakexam.Exe from the command prompt c. invoke the Last Known Good configuration when prompted d. run the emergency repair process to restore the registry Answer: c 28. Lisa' a computer is configured to dual-boot between Windows NT Server and DOS. Lisa is trying to boot to Windows NT Server, but she never gets to the NT Loader screen. How could Lisa restore the boot sector if she suspects that the boot sector is corrupt? a. boot to DOS using a floppy and run Sya.Exe from the Windows NT System directory b. boot to DOS using a floppy and run Winnt.Exe to reinstall the boot sector c. boot to Windows NT from the emergency repair disk and copy Bootsec.Dos to the hard disk d. boot to Windows NT using the three setup disks and perform the emergency repair process Answer: bd 29. Your company has 1000 computers and 500 users. All computers and users are located in one location. You want to have centralized management of all user accounts and resources. Which of the following is the beat domain model for your company? a. single domain b. single master domain c. multiple master domain d. complete trust Answer: a 30. The recommended Windows NT domain database size is 40 MB. Performance is  likely to suffer if the domain database grows beyond this limit. Your company  plans to have 50,000 user accounts, 40,000 computer accounts and 500 group  accounts on the company-wide network. What is the minimum required number  of domain databases?  a. two  b. three  c. four  d. five  Answer: a  31. The amount of time required for users in your domain to access files from  one of the partitions on your Windows NT Server machine has doubled over the  last month. Your Windows NT server has three physical disks with two partitions  on each disk. You want to pinpoint the cause of this declining disk performance.  What is the beat type of object counter to monitor to research this problem?  a. LogicalDisk object counters  b. Memory object counters  c. PhysicalDisk object counters  d. Server object counters  e. System object counters  Answer: a  32. Users from the Accounting domain and-the Sales domain share one print device. Users from the Accounting domain often print very large documents and this can cause unacceptable delay-e for small print jobs sent by users in the Sales domain. The large accounting jobs are usually not needed on the day they are sent to the printer. How would you improve the situation? a. Create a separate printer, configure the printer to print directly to the printer port, and direct users from the Accounting domain to print large documents to the newly created printer. b. Create a separate printer, configure the printer to start printing immediately, and direct users from the Accounting domain to print large documents to the newly created printer. c. Create a separate printer, configure the printer to be available only after hours, and direct users from the Accounting domain to print large documents to the newly created printer. d. Create a separate printer, set the printer to the highest priority, and direct users from the Accounting domain to print large documents to the newly created printer. - Answer: c 33. What is an advantage of using a single master domain model over a single domain model? a. centralized account administration b. support for over 2,000 users c. decentralized resource management d. a central user account database Answer: c 34. All domains in your company trust the MIS domain. What types of user accounts or groups can be added to a global group in the MIS domain? _ a. only user accounts from the MIS domain b. user accounts from both the MIS domain and from any trusting domain c. user accounts and other global groups from the MIS domain d. user accounts from both the MIS domain and from any trusting domain along with local groups from any of the trusting domains Answer: a 35. Suppose the following situation exists: Your company is based in Nashville and has branch offices in New York City, LosAngeles,.Atlanta and Dallas. Each of the five offices has 200 users. Each branch office is connected to the Nashville office via 56 Kbps frame relay links. You are asked to implement a domain model for your company. Required results: Users from Nashville must be able to access resources in Dallas and Atlanta. . Users from Loa Angeles and New York City must be able to access resources in Nashville. Logon validation traffic over the WAN links must be minimized. Optional desired results: You want centralized administration of all user  accounts. Each branch office wants to be able to manage its own resources. Proposed solution: Implement the single domain model. Place the PDC and at least one BDC in Nashville. Place at least one BDC in each branch office. Manage all user accounts from Nashville. Which results does the proposed solution produce? a. The proposed solution produces the reacquired result and-produces both of the optional desired results, b. The proposed solution produces the reacquired Result and produces only one of the optional desired results. c. The proposed solution produces the reacquired result but does not produce any of the optional desired results. d. The proposed solution does not produce the reacquired result. Answer: b 36. Suppose the following situation exists: Your company is based in Nashville,  and has branch offices in New York City, Los Angeles, Atlanta and Dallas.  Each of the five offices has 200 users. Each branch office is connected to  the Nashville office via 56 Kbps frame relay links. You are asked to implement  a domain model for your company. Required results: Users from Nashville must be able to access resources in Dallas and Atlanta. Users from LosAngeles and New York City must be able to access resources in Nashville. Logon validation traffic over the WAN links must be minimized. Optional desired results: You want centralized administration of all user  accounts. Each branch office wants to be able to manage its own resources. Proposed solution:  Implement the single master domain model. Configure Nashville to be the master  domain and all branch offices to be resource domains trusting Nashville. Place  at least one BDC from the Nashville domain in each branch office. Manage all  user accounts from Nashville. Which results does the proposed solution produce? a. The proposed solution produces the required result and produces both of the optional desired results. b. The proposed solution produces the required result and produces only one of the optional desired results. ~ c. The proposed solution produces the required result but does not produce any of the optional desired results. d. The proposed solution does not produce the required result. Answer: a 37. You want to begin auditing file and folder access for selected directories and program files on your network. What types of operating systems support file and folder auditing? - a. Windows for Workgroups 3.11 b. Windows 95 c. Windows NT Server 3.51 d. Windows NT Workstation 4.0 Answer: cd 38. You have recently migrated files from a NetWare server to a Windows NT server on your network. Your Windows NT server is using the NWLink communication protocol. Users of NetWare client machines are complaining that they no longer have access to these files since they were migrated to the Windows NT server. What can you do to remedy this problem? a. install Client Service for NetWare on each of the NetWare client machines b. install a Microsoft redirector on each of the NetWare client machines c. install Gateway Service for NetWare on the Windows NT Server machine d. install File and Print Services for NetWare on the Windows NT Server machine Answer: bd 39. During the boot process, you receive the following message after the Last  Known Good prompt:  "Windows NT could not start because the following file is missing or corrupt:  \winnt\root\ayatem32\ntoskrnl.Exe. Please reinstall a copy of the above  file." Although you did not install Windows NT in the default directory of \Winnt, the Ntoskrnl.Exe file is present on the hard drive. Which of the following is the most likely cause of the problem? a. the Ntldr file is missing b. the Ntdetect.Com file is missing c. the Bootsect.Dos file is missing d. the Boot.Ini file is missing Answer: d 40. You have just replaced the PDC in your domain with a new Pentium Pro 200 computer. The original PDC was demoted to be a BDC in the process. You want to now demote this BDC to be a member server. How do you accomplish this7 a. by reinstalling Windows NT Server b. by selecting the PDC in Server Manager, and choosing Demote on the Computer menu c. by restarting the BDC, and choosing Member Server at the startup screen d. by choosing the Network option in Control Panel, selecting the BDC, and clicking Demote Answer: a 41. Joe's network has 600 Windows NT workstations, seven BDCs and a PDC. The  primary function of the domain controllers in Joe's network will be logon  authentications. To optimize his network, which option must Joe set on each  domain controller's Memory settings dialog box?  a. Minimize Memory Used  b. Balance  c. Maximize Throughput for File Sharing  d. Maximize Throughput for Network Applications  Answer: b  42. Suppose the following situation exists: Your company uses disk mirroring  on all Windows NT servers. You are asked to implement a new fault tolerance  standard for the entire network. Required result: The new fault tolerant system must be able to recover from a single disk failure. Optional desired results: The new fault tolerant system should place less demand on system memory and the CPU than disk mirroring. The new fault tolerant system should provide better read performance than disk mirroring. Proposed solution: Implement disk striping with parity on all Windows NT servers. Which results does the proposed solution produce? a. The proposed solution produces the required result and produces both of the optional desired results. b. The proposed solution produces the required result and produces only one of the optional desired results. c. The proposed solution produces the required result but does not produce any of the optional desired results. d. The proposed solution does not produce the required result. Answer: b 43. You want to administer user accounts from six divisions at a central location. Each division has ;00 users. Administrators of these divisions want to have control of local resources but do not want to manage user accounts. Which of the following is the beat domain model for your company? a. single master domain b. single domain c. multiple master domain d. complete trust Answer: a 44. You have been given the teak of producing a baseline of processor usage for a server in your domain. What is the best way to perform this task? a. monitor and log the servers % Processor Time counter during the peak hours of the workday b. monitor and log the servers % Processor Time counter during off-hours . c. monitor and log the servers % Processor Time counter during the workday as well as during off-hours d. monitor and log the servers % Processor Time counter at a random time during the workday Answer: c 45. You want to set up five virtual servers on one Internet Information Server (IIS) to create five new arena for your company 'e Intranet. The IIS server will contain five WWW Molders that will store HTML pages for new URL zones on your Intranet. Each virtual server will have its own domain name and IP address. You want to implement these new Intranet sites with the least amount of administrative effort possible. Your network is not currently using a WINS or DNS server. Which of the following steps should you perform to configure your network to accommodate these virtual servers? (Select all steps that apply.) a. Assign each virtual servers IP address to the IIS server's network adapter card. Create a WWW folder for each company. For each virtual servers WWW folder, manually assign a corresponding IP address using the Directories Properties dialog box. b. Install a DNS server. Add each virtual servers domain name and IP address to the database of the DNS server. c. Install a WINS server. Add the NetBIOS names and IP addressee of the virtual servers to the database of the WINS server. Reconfigure the DNS server to resolve its domain names by querying the WINS server. d. Install a DHCP server. Configure the DHCP server to maintain lease information on the IP addresses assigned to the IIS server 'e network adapter card. Answer: abc 46. Tim has a local user account on a Windows NT Workstation machine. His machine is currently not attached to any domain. You install a network card in Tim's machine and physically attach 0a machine to your corporate LAN. As a domain administrator, what could you do next to allow Tim to access your domain? a. From a domain controller in your domain, add Tim's user account and machine name to the domain. Enter the domain name on the Identification tab of the Network option from Control Panel on Tim's machine. b. Supply the Guest user account, password, and domain name for the domain to Tim. Instruct him to enter this in the Logon Information dialog box during his next logon. c. From a domain controller in your domain, add Tim's machine name to the domain. From Server Manager on the domain controller, highlight Tim's workstation and select Import from the User menu to add 0a local user account to the domain. Enter the domain name on the Identification tab of the Network option from Control Panel on Tim's machine. d. From Tim's machine, enter the domain name and check the Create a Computer Account in the Domain checkbox in the Identification tab of the Network option from Control Panel. Enter your administrator user name and password. Answer: ad 47. Your network uses a single master domain model. Since all user accounts are stored on the PDC in your domain, you want to implement a fault tolerant system to protect the boot partition on the PDC. Which of the following could you implement? a. a volume set b. a mirror set c a stripe set without parity d a stripe set with parity Answer: b 48. You can use the emergency repair process to verify Windows NT system files. Which file on the Emergency Repair Disk is used to determine which files are installed during Windows NT Setup and their checksums? a. Ntuser.Dat b. System.Log c. Setup.Log d. Install.Dat Answer: c 49. Beverly is currently using a stand-alone Windows NT Workstation machine, and its local user accounts are not members of any domain. Her machine has recently had a network card installed on it and has been wired to the corporate network. All domains on the corporate network have their guest accounts configured according to the default installation settings. All domains in the network trust the CENTRAL domain. Beverly does not have Client-based Network Administration Tools loaded on her machine. She uses the Network option in Control Panel to add the domain name, CENTRAL, to her Windows NT Workstation computer. Assuming her computer name has been added to the CENTRAL domain, which of the following steps could Beverly take to log onto the CENTRAL domain successfully? a. create a new user account for herself in the CENTRAL domain using User Manager for Domains on her machine b. ask one of the domain administrators of the CENTRAL domain to create an account for her c. ask one of the domain administrators of a trusting domain of the CENTRAL domain to create an account for her d. log onto the CENTRAL domain using the Guest account Answer: b 50. The Migration Tool for NetWare in Windows NT is-useful when migrating user accounts from one or many NetWare servers to a single Windows NT domain controller. Which of the following circumstances would beat be handled by creating a mapping file before running the Migration Tool? a. when migrating user accounts from a NetWare server that do not have corresponding user accounts on your Windows NT domain b. when ensuring that all user accounts on your Windows NT domain will not be affected if corresponding user accounts exist on the NetWare server being migrated c. when ensuring that migrated user accounts have passwords in the Windows NT domain that are the same as their NetWare user account passwords d. when performing a migration of unique user accounts from several NetWare servers to a Windows NT domain Answer: c 51. You are creating a template user account to assist you when adding new user accounts to your domain. All users' home directories must reside in subdirectories under the \Home folder on server JANU. Each user must also have his own specific home directory. What must you type in the Home Directory Path field on the User Environment Profile screen when creating the template account? a. \\JANU\Home\%HOMEDIR% b. \\JANU\Home\%HOMEPATH% c. \\JANU\Home\%HOMEDRIVE%%HOMEPATH% d. \\JANU\Home\%USERNAME% Answer: d 52. Suppose the following situation exists: Your company is based in Nashville,  and has a branch office in Sydney, Australia. The WAN uses a 56 Kbps frame  relay link. DNS, DHCP and WINS servers and all domain controllers are located  in Nashville. The Sydney office has 500 workstation computers which run  Windows NT Workstation 4.0. Users in the Sydney office reported that the  network performance is unacceptably along. You are asked to optimize network  traffic over the WAN. Required result: You must speed up logon validation for users in the Sydney office. Optional desired results: You want to reduce logon validation traffic over  the WAN link. You want to reduce WINS traffic over the WAN link. Proposed solution: Set up a separate domain in the Sydney office and implement the single master domain model. Configure the Sydney domain to be the master domain. Which results does the proposed solution produce? a. The proposed solution produces the required result and produces both of the optional desired results b. The proposed solution produces the required result and produces only one of the optional desired results. c. The proposed solution produces the required result but does not produce any of the optional desired results. d. The proposed solution does not produce the required result. Answer: c 53. You are creating a stripe set without parity on your Windows NT server to speed up disk I/O operations. Which of the following beat states the minimum requirements for -implementing a stripe set without parity? a. You will need two physical hard drives. b. You will need three physical hard drives. c. You will need a single physical hard drive with three partitions. d. You will need either four physical hard drives or four logical partitions. Answer: a 54. After setting up a new domain for your business unit, you want to configure security so that unauthorized users cannot use the Administrator account to gain access to the domain. A new password on the Administrator account has already been Bet. What other action is recommended to lock unauthorized users out of the Administrator account? a. create an account with administrative privileges delete the original Administrator account b. create an account with administrative privileges disable the original Administrator account c. create an account with administrative privileges for yourself and rename-the original Administrator account d. create an account with administrative privileges for yourself and set the Account Locked Out option on the Administrator account in User Manager for Domains Answer: c 55. The Browser service failed to start on the PDC in the Exec domain. What  is the beat place on the PDC to find more information indicating why this  service failed to start?  a. the PDC's application log  b. the PDC's error log  c. the PDC's security log  d. the PDC's system log  Answer: d  56. Your organization is using a single domain split between two cities: Nashville and Memphis. Communication between the cities is facilitated by a WAN link. The PDC of the domain resides in Nashville. Users in Memphis are complaining that their logon process is along. What action should you perform to speed up logon authentication for the Memphis office? a. increase the value of the Pulse setting in the registry on the PDC in Nashville b. increase the value of the PulseConcurrency setting in the registry on the PDC in Nashville c. increase the value of the PulseMaximum setting in the registry on the PDC in Nashville d. add an additional BDC to the network in Memphis Answer: d 57. Which of the following applications is beat suited for producing a baseline  of all network activities? a. Network Monitor ii _ b. Network General 'a Sniffer c. Performance Monitor d. Server Manager Answer: c 58. Your Windows NT Server computer has two SCSI hard disks, each attached  to a separate controller. Which of the following fault tolerant strategies  would you implement on your-Windows NT Server computer?  a. disk duplexing  b. disk sparing  c. disk striping with parity  d. disk striping without parity  Answer: a 59. Suppose the following situation exists: Your network consists of two  domains: Sales and Corp. Corp is the master domain, and Sales trusts Corp  in a one-way trust relationship. Each domain has one PDC, two BDCs, five member  servers and 100 workstation computers. All servers and domain controllers  run Windows NT Server 4.0. All workstation computers run Windows NT  Workstation 4.0. You want to create a group called Allbackup that can back  up all domain controllers, member servers and workstations on the network. Required result: Members of the Allbackup group must be able to back up all domain controllers in both domains. Optional desired results: Members of the Allbackup group should be able to back up all member servers in both domains. Members of the Allbackup group should be able to back up all workstation computers in both domains. Proposed solution: Create a local group called Allbackup in the Corp domain. Add this group to the Backup Operators local group on every domain controller, member server and workstation computer. Which results does the proposed solution produce? a. The proposed solution produces the required result and produces both of the optional desired results b. The proposed solution produces the required result and produces only one of the optional desired results. c. The proposed solution produces the required result but does not produce any of the optional desired results. d. The proposed solution does not produce the required result. Answer: d 60. You have just replaced the video card on your Windows NT computer. When you restart Windows NT, the monitor displays flashing lines. What is the fastest way to resolve the problem? a. invoke the Last Known Good configuration when prompted b. reinstall Windows NT and specify the correct display adapter during setup c. boot from the setup disks and modify the Display.Ini file in the Winnt\System32 directory d. select the VGA Mode option from the startup menu to boot Windows NT, then choose the appropriate video card in Display properties Answer: d 61. You want to install Windows NT Server on a computer and configure it to be a BDC for a domain named Sales. The computer is not currently connected to the Sales domain. How should you install Windows NT Server on this computer? a. Install the computer as a member server in the Sales domain. After the computer is physically connected to the Sales domain, promote it to be a BDC. b. Install the computer as a PDC in the Sales domain. After the computer is physically connected to the Sales domain, demote it to be a BDC. c. Install the computer as a BDC in your local domain. After the computer is physically connected to the Sales domain, configure it to join the Sales domain. d. Do not install Windows NT Server until you have physically connected the computer to the Sales domain. After the computer is physically connected to the Sales domain, install the computer as a BDC in the Sales domain. Answer: d 62. There are three domains in your company: Corp, Tech, and Sales. The Corp domain is the master domain in a single master domain model. What is the easiest way to grant the right to back up any member server in any of the three domains to all users in all domains? a. Modify the user rights of the Corp\Domain Users group in the Corp domain to include the right to back up files and directories. b. Modify the user rights of the Corp\Domain Users group in all three domains to include the right to back up files and directories on each domain 'e PDC or BDC. c. Add the Corp\Domain Users group to the Backup Operators group on every member server in all three domains. d. Create a local group called BkupCorp, BkupTech or BkupSales on all member servers in the Corp, Tech and Sales domains respectively. Include the Domain Users group from each of the three domains into each of these local groups. On every member server in each domain, grant the user right to back up files and directories for each domain's respective local group. e. Create two two-way trust relationships between the Corp domain and the other domains. Create a local group called BkupCorp, BkupTech or BkupSales on all member servers in the Corp, Tech and Sales domains respectively. Include the Domain Users group from each of the three domains into each of these local groups. On every member server in each domain, grant the user right to back up files and directories for each domain 'e respective local group. Answer: c 63. You have configured your Windows NT server to save STOP information to a memory dump file. Which program would you use to view the memory dump file? '' - a. Dumpexam.Exe b. Debug.Exe c. Mem.Exe d. Dumpahk.Exe e. Viewdf.Exe Answer: a 64. In the multiple master domain model, there are at least two master domains. Which of the following beat atatea the trust relationships required in a multiple master domain model? a. Every master domain is connected to every resource domain with a two-way trust. b. Every master domain is connected to all other master domains by two-way trusts, and every resource domain trusts all master domains with one-way trusts. c. Every master domain trusts all resource domains with one-way trusts, and every resource domain is connected to all other resource domains by two-way trusts. d. Every master domain is connected to all other master domains by two-way trusts, and every resource domain is connected to all other resource domains by two-way trusts. Answer: b 65. You want to add Macintosh support on your NT server. There are two separate networks with two network cards. You want the NT server to route the Macintosh Traffic. What 2 parameters must you specify: A - Zone (Answer.) B - Internal Net C - Network Number (Answer) D - Node Type 66. Server is having some STOP errors. Add /crashdebug to boot.ini 67. You are running a server-based application on your Windows NT server computer. Users of client computers report that they frequently receive TCP/IP time-out messages when they attempt to access the server. Readme file that came with your application recommends that you use the registry Editor on the server to change the TCP/IP time-out setting. Which registry key path be need to you examined?  A. HKEY_USERS B. HEKY_CLASSES_ROOT C. HKEY_CURRENT_USER D. HKEY_LOCAL_MACHINE (Answer) E. HKEY_CURRENT_CONFIG 68. You want to prohibit users from changing the display settings on the workstations but permit them to make other configuration changes. What to do? A. Create a system Policy (Answer) B. Create a mandatory profile C. Implement login scripts D. .somethin else. 69. Three domains : HQ, D1 and D2. D1 and D2 trust HQ. Maria's back and she's put in SERVER OPERATOR group in ALL 3 DOMAINS. What can she do?  A. create users (Answer) B. manage printers C. back-up servers D. create and share resources (Answer) 70. Domain with 1 PDC and 10 BDCs. Admin has ALREADY increased the pulse setting on the PDC. The PDC is overloaded because the entire account database is being replicated to all BDCs. HOW DO YOU PREVENT THE ENTIRE ACCOUNT DATABASE FROM BEING REPLICATED?  A. decrease the replication governor on the BDCs B. decrease the PulseMaximum setting on the ??? C. increase the ChangeLogSize on the ??? (Answer) D. increase the PulseConcurrency on the BDC 71. You suspect that cache is your bottleneck - which tool to see? A. Task Manager B. Network monitor (Answer) C. Event Viewer D. Performance monitor (Answer) E. Server Manager 72. You want to assign your WindowstNT clients to use the same IP address each time they dial in to your RAS server. DHCP is not enabled? a. Enable DNS to resolve clients' hostnames to IP addresses b. Create LMHOSTS file to  c. Assign a different IP address to each user account d. Config RAS to allow client to specify IP address (Answer) Enter different IP addresses on each client 73. You have captured some traffic using Network Monitor [exhibit shows an ARP query, a DNS query, an FTP connection, and then a connection to a specific computer to resolve the name "ANNIE" followed by a series of broadcasts also to resolve the name "ANNIE"] What has happened? a. A DNS query failed b. A WINS query failed (Answer) c. A user is browsing the web d. A DHCP client had to change it's IP address 74. NT server as LAN-TO-LAN IP router. Want it to recognize other routers when added/removed. Which network service? A SAP B DHCP relay agent. C RIP for IP (my ans.) D RIP for NwLink IPX/SPX 75. Performance Monitor for disk I/O. All disk counters remain 0. a.Server Service not started  b.Workstation Service not started  c.Diskperf -y not used (Answer) d.Response Probe not started 76. How do you control access of users to NW resources through GSNW? A. Through share permission in Server GSNW B. NTFS permission, in GSNW C. Create same user account on NW as on NT server and assign permission to users  D. Create same group account on NW as on NT server and assign permission to Group (answer) 77. You have an NT server that has two network interface cards that are installed on the same network segment. Both cards are bound to TCP/IP and NetBEUI. When you restart the server, you get an error message about having duplicate server names on the network. What should you do to fix this? a. Unbind NetBEUI from one NIC b. Unbind TCP/IP from one NIC c. Create a MH entry in LMHOSTS d. Create a static entry on the WINS server (Answer) 78. Your company network consists of the MIS domain and the CORP domain. A user Jim logs onto his Workstation at home with a local account. He then connects to your company's RAS server by using DUN with CORP/JimH account. The CORP/JimH account has change permission to share on file server in MIS domain. However, when Jim attempts to access share, he receives message saying access denied. What must you do to allow Jim to access share? A. Create a local JimH account in MIS domain (MA) B. Create a global JimH account in MIS domain C. Configure Jim's Workstation as member of Corp domain, and then have Jim log onto the CORP domain via RAS D. Configure Jim's Workstation as member of MIS domain, and then have Jim log onto the MIS domain via RAS 79. Can't see PDC in Chicago. You want to install BDC in Toronto. No WINS servers. What must you do? A. Create LMHOSTS file on disk. Restart computer. Import LMHOSTS file from disk B. Create HOSTS file on disk. Restart computer. Import HOSTS file from disk C. Configure TCP/IP with a DNS server address and continue setup D. Complete setup program as stand-alone server. Create a HOSTS file and copy it to systemroot\winnt\system32\drivers\etc. Install NT Server as BDC in sysroot (MA) This was a crappy question because they don't mention if there is already an OS installed. How can you create a HOSTS file if you don't have any OS. That's why I chose D... I could be way off. 80. Julia is a member of CORP. Accounting server is being used a RAS server. Accounting trusts CORP. Error - account does not have RAS permission. What must you do to allow access? A. Grant Julia dial-in permissions in CORP domain. B. Grant CORP\Julia the ACCESS THIS COMPUTER FROM NETWORK right to the RAS server C. Create local account for Julia on RAS. Grant dial-in permissions to new account. (MA) D. Create global account for Julia in the accounting domain. Grant dial-in permissions to new account. 81. NT Server attached to Ethernet and Token ring network. Client computers on two networks are NT Workstation. Use NWLink IPX/SPX only. Want NT Server to act as an IPX router between the two networks. All clients need access to shared resources on both networks in network neighbourhood. A. Install SAP agent Configure internal network number for each network B. Install SAP agent Install RIP for NWLink IPX/SPX compatible protocol (MA) C. Install RIP for NWLink IPX/SPX compatible protocol Install file and print services for netware D. Install RIP for NWLink IPX/SPX compatible protocol Enable NetBIOS broadcast propagation 82. Six business units. Configure directory service architecture so that all accounts to be managed on a central database. Admins in each unit to manage resource permissions on their local domain controller only. A. Single domain B. Single master domain (Answer) C. Multi master domain D. Complete trust 83. You use NT Workstation. You want to use the full version of Network Monitor to capture and view traffic to and from a NT Server that is located on a remote subnet. A. Set a display filter something or other.... B. Set a capture filter he says while trying to remember the rest of the question C. Install Network Monitor Agent on comp on the same subnet as server (Answer) D. Install Network Monitor Agent on comp on the same subnet as your comp 84. You create System policy file with custom setting and restrictions for three different global groups in a domain. Several users are members of more than one group A. Something irrelevant B. Something even more irrelevant C. Modify the policy template to specify the priority level of every policy file E. Modify the policy file to specify the priority level of every global group (MA) 85. You want to create a database of measurement info that will be used for later analysis on NT Server. Choose all that apply A. Excel B. Response probe (MA) C. PerfMon (MA) D. NT Server 4.0 Network Monitor (MA) 86. Your network consists of three domains, named HQ, DOMAIN1, DOMAIN2. A trust relationship exists so taht DOMAIN1, DOMAIN2 trust HQ. All user accounts are maintained in HQ. All client computers on the network are windows NT workstation computers and are member of either DOMAIN1 and DOMAIN2. You have just hired a new network administrator named Maria. You want to accomplish the following goals : - Allow Maria to add new domain users accounts. - Allow Maria to manage printers on any domain controller. - Allow Maria to perform a tape backup of any domain controller. - Allow Maria to create shared directory on any domain controller. You take the following action : - Create a global group named SYSOP in the HQ domain. - Add Maria to the SYSOP group. - Make SYSOP a member of the print operator group in HQ, DOMAIN1, DOMAIN2. - Make SYSOP a member of server operator group HQ, DOMAIN1, DOMAIN2. Which result do thes actions produce ?(select all) A. Maria can add new domain user accounts. B. Maria can manage printers on any domain controllers. C. Maria can perform a tape backup on any domain controllers. D. Maria can create shared directory on any domain controllers. 87. You are responsible for managing the SALES domain of a single domain network spanning two cities, Mexico City and London. In each city are 50 client workstations. Mexico City has one NT server configured as a Primary Domain Controller and running DHCP and WINS server services. London also has an NT server which is configured only as a member server providing file and print services. Your users in London complain of slow logon attempts and client bootup times. Browsing through Network Neighborhood has also become unacceptably slow. Users in Mexico City though are not reporting any problems with network performance. Required Result: Increase the performance of the network in London to the same level as Mexico City.  Optional Results: -Reduce logon validation traffic over the 64K ISDN WAN connection  -Reduce DHCP traffic over the 64K ISDN WAN connection  -Reduce WINS traffic over the 64K ISDN WAN connection  -Provide the same measure of NetBIOS name resolution in London as in Mexico City  Proposed Solution: -Install a DHCP server in London  -Add WINS and DNS server services to the NT server in London  Results of this solution: A. The solution produces both the required result and the optional results  B. The solution produces the required result and only two of the optional results  C. The solution only produces the required result  D. The solution does not produce the required result * 88. you want a dump of sys memory file to identify sys faliure if the dump file is larger than the ram.and something about sending it to microsoft for review. a- event log b- dr watson c- write an event to sys log d write debugging to %systemroot% \memory dmp (Answer) 89. You are planning directory service architecture for your network. You want to create 3 domains named HQ, DOMAIN1, DOMAIN2. Your network includes 400 Windows NT Workstation computer that will be member of either DOMAIN1 or DOMAIN2. You will create user accounts in the HQ domain only. You want each user to have a single account on the network. You want to only group accounts when you permit access to resouce in DOMAIN1 or DOMAIN2. Which three things must you do?(select three) A. Create trust DOMAIN1 and DOMAIN2 trust HQ.** B. Create trust HQ trust DOMAIN1 and DOMAIN2. C. Create global group in HQ. Add user from HQ to these global group.*** D. Create Local group in HQ. Add user from HQ to these local group. E. Create global group in DOMAIN1 and DOMAIN2. Add user from HQ to these global group. F. Create local group in DOMAIN1 and DOMAIN2. Add local group from HQ to these local group. G. Create local group in DOMAIN1 and DOMAIN2. Add global group from HQ to these local*** group. 90. You have 2 sites, one in NYC, one in LA. PDC located in NYC. You are trying to install a BDC at LA but it complaints about PDC cann't being located. What will you do? ( answer are not word-for-word) a. Load LMHOSTS then continue (Answer) b. Load tcp/ip and DNS, then continue c. Load HOSTS files,then continue  d. setup as member server then change it to BDC later. 91. You are responsible for managing the SALES domain of a single domain network spanning two cities, Mexico City and London. In each city are 50 client workstations. Mexico City has one NT server configured as a Primary Domain Controller and running DHCP and WINS server services. London also has an NT server which is configured only as a member server providing file and print services. Your users in London complain of slow logon attempts and client bootup times. Users in Mexico City though are not reporting any problems with network performance. Required Result: -Increase the performance of the network in London to the same level as Mexico City.  -Reduce logon validation traffic over the 64K ISDN WAN connection  Optional Results: -Reduce DHCP traffic over the 64K ISDN WAN connection  -Reduce WINS traffic over the 64K ISDN WAN connection  -Provide WINS fault tolerance Proposed Solution: -Install a DHCP server in London  -Add WINS and DNS server services to the NT server in London  -Configure the Mexico City and London WINS servers to be Push and Pull partners of each other. Results of this solution: A. The solution produces both the required result and the optional results  B. The solution produces the required result and only two of the optional results  C. The solution only produces the required result  D. The solution does not produce the required result (yes) 92. You log on from a computer in the MKTG domain to one in the CORP domain. The MKTG domain trusts the Corp Domain. Which resources? A in MKTG, MKTG/DOMUSERS access B in CORP, CORP/DOMUSERS access (answer) C in CORP, CORP/DOMGUESTS access D in CORP, MKTG/DOMGUESTS access 93. You have a server, running the following services - RAS, TCP/IP, No DHCP (other dumps day you HAVE DHCP). How can you assign predetermined IP addresses to a RAS user loggin into your Domain.? A use DNS server B hosts file C on RAS, assign IP to accounts, granted access to dial in permission (yes) D on RAS, allow clients to specify own IP address