|
|
 |
|
1. You use performance monitor and see your processor is running at 92% and you have excess paging. What would be the best way forward to address the issue? A. Add another processor 2. Situation: You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files, varying in size from 1MB to 10MB, for other computers in the same LAN. You have there a SCSI controller with 4 disks of 2 GB each,formatted with FAT. Required result: To optimize performance for optimum speed of access to local data files. Optional results: Reconfigure for optimum speed of access to paging file. Optimize network access performance. Proposed solution:Configure the first hard disk as boot partition. Configure the other 3 disks as a Volume Set. Use FAT on all partitions. Place data on the Volume Set. Place paging file on the boot partition. Configure binding order of protocols; move most used protocols to the bottom of binding order. The solution produces: A. The required result and 2 of the
optional results. 3. You installs client Service for NetWare on a Windows NT workstation. Which networking tasks can be performed from the computer? (Choose all that apply) A
Allow NetWare client computers to use shared directories and printers
on your NT WS computer. 4. Computer has 2 ISDN adapters installed. Each adapter has 2 B-Channels that can be used with Dial-Up Networking to connect to your company's RAS Server. RAS Server also has 2 ISDN adapters. Each B-Channel has its own phone number. How do you configure and use Dial-Up Networking's Multi-Link option to use all four channels when you connect to the RAS Server? A. Create a phonebook entry for each
ISDN B-Channel. Connect to RAS Server using all four entries. 5. You install CSNW on Workstation computer. What are the 2 different ways to change password for your Netware 4.x user account from Windows NT Workstation computer?(Choose two) A. Choose Network from Control Panel. 6. You have several DOS program you want to run under NT. You need to run a TSR that controls the COM port for these DOS program. How do you run MS-DOS the Terminate and Stay Resident (TSR) application? A. Start it in its own NTVDM 7. You are printing to a NetWare printer, how do you disable the blank page at the end on each print job? A. From within CSNW, deselect add form feed 8. Which three files are required to run unatteded installation? A. Unattend.txt 9. What must be installed to send a trap message? A. SNMP 10. Having an NT Workstation 3.51 Intel 386 33 MHz CPU 16 MB RAM, you want to upgrade it to NT Workstation 4.0 with the same settings as in the3.51 version. What to do? A. Boot from bootdisk and run winnt32.exe
11. When you try to establish a RAS connection with your department's server, the connectin is dropped after having been connected for a number of seconds. What is the best way to start investigating this problem? A. activate the Device.Log file, establish a connection
and then view the contents of Device. Log. 12. You want to enable auditing for the HP printer attached to your Windows NT Workstation computer. Which type of auditing events should you enable in User Manager on your workstation? A. File and Object Access 13. Which of the following statements best describes the function of an answer file during automated installations? A. It provides specific settings for installing
software applications. 14. A user moves a folder from an NTFS partition on his Windows NT workstation to a shared NTFS folder on a remote Windows NT server. What will be the permissions of the moved folder? A. No access permission 15. Cathy is installing TCP/IP on a Windows NT workstation in a routed network. She manually assigns an IP address to the workstation. What other parameters must she specify to install TCP/IP on the workstation? A. the default gateway 16. Which utility would you use to search for a particular value in the registry? A. Regedit.Exe 17. Your Windows NT Workstation computer has three modems installed. An ISDN line with two B-channels and a dedicated phone line are attached to your computer. Each B-Channel has a separate telephone number. The RAS server to which you plan to connect has four modems and four phone lines installed and has Multlink enabled. How should you configure the phone book entries on your workstation to allow for maximum throughput when connecting to the RAS server? A. Create a single phone book entry and configure
this entry to dial using all three modems. Enter a unique RAS server
phone number for each modem to dial. 18. You implement changes to the system policy for 25 individual user accounts on your domain. You store the system policy file containing the new policy in the \Netlogon directory of the PDC. All users log on to the domain when accessing their computers. Your domain consists of 100 Windows NT workstations, four member servers, a PDC and a BDC. At the end of the day, you poll the 25 users to find out how they feel about the changes to the system policy. You discover that five of the users did not receive the changes. What is the most likely cause of the problem? A. the five users belong to groups that have conflicting
systems policies. 19. You want to install several network components on your Windows NT Workstation computer. However, your computer doesn't have a network adapter installed at the present time. Which of the following would you do? A. install the driver for the Microsoft Dial-up
Adapter, then install other network components. 20. You want to capture packets tranmitted to and from your network card. Which of the following do you need to install? A. Network Monitor Agent 21. What type of name resolution does a Domain Name System server provide? A. domain names to IP addresses 22. One computer used by three users. They want their files securely and own their individual desktop setting. What THREE steps must you do for them: A. Create one account for each user 23. There are 20 laptop computers and 50 desktop computers. You want to install NT workstation 4.0 and five applications on them. Required: Auto install NT Optional: Auto install applications A. Solution meets the required and all the optional.
24. Your current computer
config is: you notice in Performance monitor you've had a lot of page faults. How can you correct this problem? A. Increase Paging File size 25. How should you use an unattended.txt file (answer file) during the Automated installation of a Windows NT Workstation on 100 identical new computers? A. To provide hardware-specific
configuration information and other configuration data for the computers. 26. Situation: You have to
install 30 desktops and 50 laptops. Optional results: You want all computers to join the CORP domain. Automate the installation of applications on all computers. Proposed solution: Create 1 SETUP.INF for all computers. Create 1 UDF with unique hardware configuration for each type of computer. Install NT Workstation on 1 type of computer, run sysdiff /snap, install suite of applications, run sysdiff/diff, use unatttend.txt. The solution produces: A. The required result
and 2 of the optional results. 27. You have a setting of 50 workstations and one NT Server. CEO DavidP wants to control all users access to his computer. Others will use his computer when he is away. Required: DavidP must be able to manage his files and directories securely. Optional: All users should be able to manage the files & directories that they create DavidP should be able to assign rights via the Domains user groups. Solution: Install NTFS on the new computer with NT Workstation onto a workgroup. Add DavidP to local Administrators group and remove all other users from the Admin group. A. The solution produces the required
result and both optional choices. 28. How do you print to a TCP/IP printer?
29. How do you trap packets of TCP/IP?
30. What protocol/service do you need to
send TCP/IP trap messages to A. SNMP 31. NT Workstation
is member of workgroup. You want to map network driver on A. logon to your NTWS by using a user name from
the Corp domain. 32. Client service for Netware : A. allow Netware client to use share directory and
printer on NT Workstation. 33. NT workstation needs access NT server
and Netware server on network. A. DLC 34. How do you start the backup program
in a minimized window with low A. start /min /low ntbackup. 35. NetWare question, with CSNW installed
on your NT Workstation, what function A. run netware login script 36. What service/protocol must you install
to view statistics on packet transfers A. Streams environment 37. When Susan tests her display, the screen goes blank. When she restarts, the Display properties dialog is opened. What¡¯s wrong? A. Display type 38. You are installing NT and testing the
monitor type and the screen goes A. Refresh rate 39. Which of the following is used to search for the value of a key in the registry? A. regedit.exe 40. You have sent a job to a printer and it jams. You cannot re-send the job to the printer, what do you do? A. Select resume from document menu? 41. You want to send a document from your
Windows NT workstation computer to a printer that is located on another
Windows NT WS computer. You want to do this without permanently installing
drivers for that printer on your hard disk. What should A. Use "net print" to send the document to the printer.
42. You want to set the boot delay time
to 10 seconds. How should you proceed? A. Edit Boot.ini to set timeout to 10 seconds
43. You want to replace Windows 95 by Windows NT Workstation 4.0 on some user computers.They all want to keep their Windows 95 desktop settings and all their applications. How should you proceed? A. Run WinNT.exe and Install Windows NT in the same
directory as Windows 95 44. Your computer is setup to dual boot
MS-DOS and Windows NT 4.0 Workstation. A. The BOOT.INI file is corrupted 45. Situation (Long): You are planing to
reconfigure an NT Workstation with 32 MB Required result: To optimize performance
for optimum speed of access to local data files. Proposed solution: Configure the
first hard disk as boot partition. Configure the A.The required result and 2 of the optional results.
46. What is the unattend.txt file used for? A. Automatic installation of application 47. While system policy and users profiles have a conflict what takes precedence? A. only user profiles 48.You install dial-up networking with default
options. You create a phonebook entry A. Phonebook entry 49. What happens when you run a 16-bit MS
windows based application in its own A. Application runs at higher priority; 50. You have an NT Workstation with TCP/IP
installed and you want it to become an FTP server. What protocol or service
do you need? 51. Your computer runs only Windows NT Workstation
on an NTFS partition. You A. Run Sys.com 52. When you start your computer from a
boot disk, your computer starts. 53. You install a 32-bit application designed
for NT Workstation 4.0 that will use the 54. You want to set up 50 roaming profiles,
ensuring that the clients keep their current 55. How can you configure a printing pool? A. Associate one print device with multiple printers. 56. You want to install a new internal CD-ROM drive. You must first confirm that there will be no IRQ conflicts.How should you do this? A. Use server manager. 57. Which permissions are valid for files on an NTFS partition? (choose all that apply.) A. Change 58. Which permissions can be applied to a share name? (choose all that apply.) A. Change 59. You installs Client Service for NetWare on a Windows NTworkstation. Which networking tasks can be performed from the computer ? (Choose all that apply) A. Allow NetWare client computers to use shared
directories and 60. Peter Smith wants to install Windows NT Workstation without user invention. He plans to do this by running winnt.exe with the /u switch. Which additional file must he use? (Choose one) A. Uniqueness database file (UDF).
|